jessie4649
Bronze Contributor
Purchased the Duneshore direct from Visitor. Comes with the Sienna French Deerskin strap, purchased for an extra $80USD (currently installed).. Also comes with the Duneshore Bracelet mesh, purchased for an extra $110USD. I wore this watch no more than a dozen times. It is in lovely condition. Selling CDN $710 + $40 shipping to U.S. or Canada -- No trades at this time
The following details are from the Visitor website:
The Duneshore features a sculpted, mirror-polished case with a curved, exhibition caseback. The sandwich dial (notice the minute mark holes) is rendered in semi-gloss, giving it the appearance of wet ink to match the pen-nib-inspired hour and minute hands. Hour marks are individually applied and filled with blue-glowing BGW9 SuperLuminova. Lume is further applied to the hour and minute hands, the lower dial disk (which creates the minute marks), the dial signature, and the date numerals. The Duneshore case is made of 3 pieces of 316L Stainless Steel and features a screwed construction. Water resistance is rated at 100 meters thanks, in part, to a screw-down crown and a 2.5 mm thick sapphire crystal over the dial, which is treated with anti-reflective coating on the underside. Powering the Duneshore is a Miyota 9015 with custom rotor and date disk. The watch also features pierced lugs for quick and simple strap changes. The Duneshore case measure 44 mm by 42 mm, with a 51 mm lug-to-lug length, and a thickness that varies from 11.7 mm at the valley of the curved caseback to 13.7 mm at the crest
Please feel free to PM for questions or more photos. Thanks
The following details are from the Visitor website:
The Duneshore features a sculpted, mirror-polished case with a curved, exhibition caseback. The sandwich dial (notice the minute mark holes) is rendered in semi-gloss, giving it the appearance of wet ink to match the pen-nib-inspired hour and minute hands. Hour marks are individually applied and filled with blue-glowing BGW9 SuperLuminova. Lume is further applied to the hour and minute hands, the lower dial disk (which creates the minute marks), the dial signature, and the date numerals. The Duneshore case is made of 3 pieces of 316L Stainless Steel and features a screwed construction. Water resistance is rated at 100 meters thanks, in part, to a screw-down crown and a 2.5 mm thick sapphire crystal over the dial, which is treated with anti-reflective coating on the underside. Powering the Duneshore is a Miyota 9015 with custom rotor and date disk. The watch also features pierced lugs for quick and simple strap changes. The Duneshore case measure 44 mm by 42 mm, with a 51 mm lug-to-lug length, and a thickness that varies from 11.7 mm at the valley of the curved caseback to 13.7 mm at the crest
Please feel free to PM for questions or more photos. Thanks
Attachments
Last edited by a moderator: